This winch features a freespool, power in and power out.
The X-Series winch may be mounted in either a horizontal or vertical position on a base, wall or other suitable support. In all installations, the winch must be mounted so that the rope feeds parallel to the mounting surface and does not rub across the housing or the base. Do not mount winch in an overhead hoisting position or use for overhead hoisting. Do not use the winch to hold loads in place. Never use your winch for lifting or moving people.
|Winch Technical Details|
|AMP Draw - Full Load||200|
|AMP Draw - No Load||30|
|Capacity - Rated Line Pull of Bottom Layer (kg)||910|
|Capacity - Rated Line Pull of Bottom Layer (lb)||2000|
|Drum Diameter||1.63" (41mm)|
|Drum Length||2.6" (66mm)|
|Fairlead||N/A, Wire Rope Tensioner|
|Installed Weight||20lb (9kg)|
|Line Speed - Full Load (m/min)||2.1|
|Line Speed - No Load (m/min)||7.8|
|Motor Output (hp)||1.3|
|Mounting Bolt Pattern||2 Hole 3.69” (94mm) on Center|
|Remote||N/A, Removable On the Motor Switching|
|Rope||Wire Rope 3/16" x 50' (4.8mm x 15.2m)|
|Solenoid||Solenoid & Circuit Breaker Protected|
( part of PWS Engineering (Poole) Ltd ).